- 03-31-2013, 02:07 PM #1
Ok, I guess I may have a problem with my screen. After removing one of those gadgetshieldz protectors (wet apply) the screen looks weird, especially when displaying white. It looks like there's some dirt on it making it look pixelated and greyish, while just a couple of weeks ago the whites were super crisp. It really seems like it's the glass to be blamed, because you can actually see the text sliding below this sort of "dirt" when you scroll. However when the screen is turned off it looks perfectly clean. I think the problem can be caused by the coating wearing off, possibly damaged by the screen protector...I also got a "stickier" area around the earpiece that has the coating obviously wearing off, because it collects dirt and smudges much more than the rest of the screen, but that would be a whole different story, I've heard of many others with the same issues, but frankly it doesn't even bother me. Anyone having similar issues? I'll try to get the phone replaced or at least repaired next week, this is ridiculous, I have a phone with an HD screen looking more fuzzy and pixelated than my GF's 710. You may say that I shouldn't have applied the screen protector and whatnot, but frankly I've been using these protectors on my old 800 for a year and the screen is mint. There's something very wrong with the coating of the 920, I suggest you to be very careful with screen protectors, maybe paradoxically going naked is less dangerous...
03-31-2013, 11:41 PM #4
- 789 Posts
I had a similar thing on my old iPhone when I removed a screen protector. With some glass cleaner and a lot of rubbing with some dry paper towels it cleaned up but really left a nasty residue that had to be cleaned up. No idea what brand protector I was using but I think its common. Not sure what I'd use on the 920 as its not glass...
- 04-02-2013, 08:21 AM #5
Ok I got an update on the issue. A guy over at XDA suggested me a possible reason for this to happen: maybe it's the fact that I didn't use distilled water during the apply, but simple tap water. Apparently non distilled water can contain some minerals that after some time may eventually deteriorate the coating. However this is still weird because I've never had issues on my older phones with Gorilla Glass, and I've always applied the protectors using the same method. I also tried some of that Fusso Smartphone thing to recoat the screen but no luck, I guess this one is going straight to Nokia repair center, hopefully they will consider it a manifacturing defect and won't charge me...and no I don't really feel like stealing here because come on, let's face it, a Gorilla Glass screen getting damged by a few drops of tap water? Gotta be kidding me...
- 04-02-2013, 09:31 AM #6
I think this is seriously blown out of proportion. It absolutely sucks for you, but I think that was a freak problem. Considering the hundreds of thousands, if not millions of screen protectors being installed on gorilla glass 2 phones, I have never heard of this issue before. I would bank of your issue being a manufacturers screen defect over anything else.
Sent from my LG-E970 using Tapatalk 2
- 04-02-2013, 11:36 AM #9
Not sure if I can post a link to another forum here, I've sent you a PM with the link tho.
- 04-02-2013, 02:20 PM #10
- 04-02-2013, 05:15 PM #11
- 04-04-2013, 08:11 PM #12
Finally i have installed gadgetshieldz on mine perfectely, the proximity sensor was blocked though which i had to make a cut manually with a sharp blade...
been upto 12 hrs and all the haziness and bubbles dissapeared, not much of a orange peel
@vnvman : after installation, how long did it take for the defect to appear?
i am just hoping your case doesnt happen to me
04-14-2013, 03:51 AM #14
- 90 Posts
- By Entoni_1 in forum Nokia Lumia 920Replies: 5Last Post: 03-26-2013, 06:03 AM
- By saedude1983 in forum HTC 8XReplies: 7Last Post: 01-31-2013, 07:30 AM
- By littlesteelo16 in forum HTC TITANReplies: 6Last Post: 12-13-2011, 07:03 PM
- By jrdatrackstar#WP in forum Windows Phone 7Replies: 12Last Post: 09-24-2011, 09:51 PM