- 03-25-2013, 06:36 PM #1
I have an AT&T-branded Lumia 920. As background info, I keep my data and wi-fi connections off until I need them.
I've been having an issue for the past two months or so whereby my phone loses connection after being dormant for some time. I can't say what the threshold after which it loses connection is with any certainty, but I would estimate it to be around one hour. Once it loses connection, I do not receive any text messages, calls, or voicemails until I attempt to send a message or make a call. During this time of dormancy, the phone always shows three signal bars. However, when I make a call or send a text message the signal bar immediately flashes the no signal symbol and then updates to the real current signal strength. A few minutes later I get a barrage of text messages that had been sent to me during the period of dormancy but that I didn't receive until I manually reestablish connection (the texts list the timestamp from when they were sent). However, I do not receive notifications of missed calls (though I do get voicemails that were left, if I check for them).
This issue happens every day, without fail, and has resulted in me missing important text messages and calls. A month ago I contacted AT&T tech support, and they told me the registration for my phone in their system looked "weird" and then proceeded to re-register my phone. This did not solve my problem.
Any suggestions you may have are greatly appreciated.
- 03-25-2013, 07:23 PM #2
Does the problem persist if you leave your mobile data switched on?
It would also help to know which firmware version you currently have - go to settings > about > more information and tell us what it says for Firmware revision number and Radio software version.Lumia 925 | Surface Pro |
- 03-25-2013, 07:38 PM #3
The only connection issue I have observed with mine is sometimes I lost my data connection after it is dormant for a period of time or while it is charging. This has never affected my calls or texts but has FB notifications, browsing pages, etc. I have learned to get this back by simply opening my browswer going into "tabs" and closing out the active tab there and then relaunching my browser. Once I do that I no longer get page cannot be displayed and my browser and other internet connections come back.
- 03-25-2013, 08:17 PM #4
Settings - cellular/mobile data - Highest connection speed- 3g or 4g?
03-25-2013, 09:08 PM #5
- 8 Posts
I have the same problem and restart of the phone will help (sometimes do a soft reset by pressing volume down + power for ten sec, soft rest does make it happens less frequently). Change your connection speed to 3G as highest.
This problem happens more frequently when you are in a lower reception area that jumps between 2G to 3G or 4G.
I would like to see Nokia/MS fixing this problem. Because it is really annoying..
- 03-26-2013, 01:13 AM #6
Firmware revision number: 1232.5951.1249.0001
Radio software version: 1.0.202075.3
I don't seem to have a settings page where I can change my highest connection speed. My "cellular" setting page only has data connection on/off and roam/don't roam options. I do have an access point setting page which seems to have "AT&T - LTE 2 - Lumia" as active.
Restarting my phone has had no effect, but I do think that this problem only occurs in places where the signal strength is less than ideal (i.e. my home).
- 03-26-2013, 04:56 AM #7
Assuming it's the latter, can you do the following:
Dial ##3282 [call]
In the field test menu, select LTE and note the contents of the display
Use the back key to exit
Wait for the phone to "die" and repeat the attached
Post both sets of results up here.
What I am wondering is if the combination of low signal strength and the phone's various power saving modes is causing either the phone or your nearest cell tower to drop the link. Hopefully the diags will show this. If so, I think this is resolved in the 1308 firmware.Lumia 925 | Surface Pro |
- 03-27-2013, 03:18 PM #9
Ok, that's helpful insofar as it rules out my theory that the radio is going to sleep because of a marginal signal and ENS being enabled. There's plenty of signal (in LTE terms). You are running on the merged Cingular/AT&T network.
As the 1308 firmware is now being rolled out for AT&T customers I'd be tempted to wait for that before going any further.Lumia 925 | Surface Pro |
- 03-27-2013, 05:38 PM #12
One of my previous 920s had a similar issue. When put to sleep, the phone had trouble staying connected to the signal. So it would drain the battery like crazy. When i woke up the phone, i see the signal bar change to the no signal icon and then wait a bit and then increases from 1 to 3 or 4 bars thereafter. If i put the phone to sleep again, i wake it up, same thing.
At this point, not sure why you waited two months to do anything, if your phone does not work properly do a warranty exchange. Dont try to fix a broken phone, return a broken phone. Im on my 4th 920, i dont care what it is, if it doesnt work right, im not troubleshooting, im exchanging it.
I suggest you do the same instead of trying to fix a broken phone.
If you exchange your phone and it still happens, then its probably not your phone, its your area.
- 03-27-2013, 06:00 PM #14
Yes, I updated to 1308, and the ##3282 portal no longer works. However, I would like to note that the radio software has also been updated. I do not know as of yet if this will solve the connection issue I have been having, but I will see if it does and reply to this thread accordingly.
To dkp23, I purchased my 920 from Walmart back when they were free there. Exchanging it there would be difficult at best, but I'll see what happens.
- 03-27-2013, 07:06 PM #15
- 03-29-2013, 10:07 AM #19
04-01-2013, 03:56 PM #21
- 3 Posts
I have the same issue. It's a completely unacceptable situation as the device is not capable of functioning as a phone if it cant receive calls reliably. Toggling airplane mode, making calls and soft resets help wake the cellular modem up but that's only a temporary fix. I would like to try and force the 3g only option if that fixes the issue but it seems I can't do that after the latest update. Having the data connection on doesn't help. Phone is right in front of me showing 3 bars but it goes straight to voicemail if I call it.
Is this even a defective piece or is the problem more to do with my location and signal.
- 04-01-2013, 04:40 PM #22Lumia 925 | Surface Pro |
04-01-2013, 07:57 PM #23
- 3 Posts
I don't think it has anything to do with the tower being busy. There are other phones in the apartment connected to the same network that work just fine. I think its more to do with the antenna / radio on the Lumia 920. I have noticed that this bug manifests itself with a different frequency after the latest update.
After browsing around for a bit it also seems like it might be a Windows phone 8 issue and not just a Nokia issue:
Not getting texts or calls until I make a call or send a text - Microsoft Community
HTC 8X not receiving all texts Support | T-Mobile
If this is the case then it is interesting how only a certain percentage of users are affected. Right now I wouldn't mind setting the phone to 2G as that apparently fixes the problem. Anyone solved this problem by doing a warranty exchange for a new device?
- 04-02-2013, 11:45 AM #24
- 04-10-2013, 08:55 PM #25
Data now barely works... Either doesn't work or very slow (0.3 Mbps) under LTE. I'm also missing calls and texts. Sometimes the phone just says no network.
This is truly unacceptable. At&T and Nokia, what is going on? I called AT&T tech support and they renewed my phones registration and said everything looks good from their perspective. However, none of my problems have been solved.
- By crg28 in forum Windows Phone 7Replies: 2Last Post: 12-20-2012, 02:51 PM
- By tomcott in forum HTC HD 7 / 7sReplies: 0Last Post: 07-29-2011, 05:57 AM
- By tuffluck in forum Samsung FocusReplies: 13Last Post: 07-13-2011, 03:52 PM