Member
| 12-15-2012, 04:18 PM #4
UPDATE: OK, after finding and reading this:Fix for bricked 920's after reset. Flash Process defined inside! I found a fix in someone's post other than flashing it which I tried. After trying several tries and nothing, I decided to remove a step and that was to skip holding the volume down and power for 10 seconds step. That worked like a charm and much more quicker and simpler than flashing. When successful, the exclamation mark will disappear and you will see two gears turning for a few minutes(It is resetting at that time) When reset is complete, Nokia will appear and then reboot. Upon rebooting, it will boot up as normal and go through the setup process. So hopefully this helps someone else as well. Here is the post I followed, remember, If it doesn't work their method, just remove the step I mentioned. Thanks for the responses.  Originally Posted by andrantos I factory reset bricked my phone as well. I followed these steps and it thankfully resolved the issue. I was provided these steps from a CSR and it also successfully reset the phone as well without bricking it:
Step 1:
1. Make sure the charger is disconnected.
2. Switch the power Off.
3. Press and hold the Volume down and connect the charger, if succeed an exclamation mark (!) is shown on the screen.
(To exit press the Volume Down + Power Key and hold them for 10 seconds).
Step 2:
Then input Keys in the following order:
1. Volume up
2. Volume down
3. Power
4. Volume down
Since the last reset via hardware buttons, I've successfully factory reset the phone through the "About" screen twice now. | |
|
Latest Comments