- 09-25-2012, 01:16 AM #1
I thought I would share that I was able to get internet sharing working on my unlocked Lumia 900 (originally from Rogers) running on the Bell network.
It was a total fluke, but here is what I did.
I had already downloaded and played with the Nokia Care Suite. I frequently use Data package Manager to see if there is an update available. Tonight when I did this a new package was listed. Nokia 900 RM-808 Telcel MX MX Black V1 with SW Version 2175.2302.8779.12310. I thought, what could it hurt to load this and see what happens. In the back of my mind I was thinking if I brick my phone then I have an excuse to go grab a Galaxy SIII of Kijiji.
I downloaded the package and then launched Product Support Tool For Store from the Care Suite. I used that in Recovery mode to install the Telcel SW onto my phone. After about 2 minutes I stupidly moved my phone and the cable disconected and it wouldn't boot up. I thought I was pooched. However, when re-connecting the phone, the support tool recognized it in flash mode and I was able to re-flash the phone with the SW and it worked.
The phone booted up in Italian, but I was able tochange the language to English.
I went through the setup, then I checked what came pre-loaded on the phone. I have heard that European ROMS come with Network Setup pre-loaded so I was hopeful I would have it, but I didn't. Then I thought, what about internet sharing? I added the Bell APN, then went to internet sharing and turned it on. Voila! It worked! I was able to configure the SSID and password. Then just to be sure I grabbed my laptop and connected to the hotspot, and it worked. Very well! I went to speedtest.net and it showed 10Mbps down and almost 4Mpbs up, and this was in my basement with 3 bars.
Everything else seems to be working. I have re-setup my email. Downloaded apps. Setup facebook, etc...
Voicemail doesn't work right away, it is set to dial *86, but I quickly googled how to change the voicemail number (Phone -> call settings ->voicemail number) and I got that sorted out.
MMS still doesn't work because Network Setup isn't available in Canada, but I was more interested in the internet sharing anyhow.
Hopefully this will help others using a Rogers Lumia 900 on other networks. Obviously you do this at your own risk, if you brick your phone it's your problem, not mine :D
- 10-13-2012, 01:22 AM #5
I noticed today there was another new ROM available. This was another TelCel package but it said LTE Variant. (or something close to that)
I flashed my phone with that ROM, hoping I would have 4G displayed and not H and/or Network Setup App would be part of the ROM.
Well, no 4G, it says H. However I have been testing speeds with the Bandwidth App and my 4G speeds are the same as I got when it said H so I was not too worried about that anymore.
Here is the awesome part. I am able to send and receive MMS now!
No network setup app. It just works. It must actually be getting the settings from my SIM. I didn't need to add a data APN either.
This confirms that Nokia has been correct all along, the phone SHOULD be able to get the settings from your SIM. It also confirms that Rogers and AT&T are disabling this auto-configuration in their ROMS. Very shady on their parts.
So now, I have a Lumia 900, unlocked, running on Bell, with working internet sharing and MMS. I am very, very happy!
- 10-16-2012, 02:05 PM #7
- 10-16-2012, 10:29 PM #8
Actually, I opened Product Support Tool For Store, then clicked on File -> Open Product, put Rm-808 in the filter and selected that then clicked Open.
Then I clicked on Programming, and Recovery.
From there I could flash the phone with the TelCel ROM. However, this was not an update. It was a recovery, all my settings, etc... were gone and I had to re-setup my phone. It was totally worth it though and 90% of my setting are tied to my Microsoft Account so it's really just putting in that and my email settings and re-downloading any apps I had. You don't have to re-buy them, just click on buy and it says you already bought it do you want to re-install, say yes.
10-27-2012, 01:19 PM #9
- 15 Posts
- 10-31-2012, 09:37 AM #11
I think there is a way to get this working just by messing with the network Setup option. I have an ATT 900 and I was mucking with it, trying the Bell setting above. Instead of getting that **** me off ATT message about tethering I got a message that cellular data wasn't enabled. This makes me think that you can make this work with Straight Talk if you can get the right settings to establish a cellular data connection.
11-13-2012, 10:26 AM #14
- 59 Posts
I have a Lumia 710, but the only packages available for Telcel are:
Telcel MX .. V5
Telcel MX .. V2
So there's no Telcel LTE Variant (which makes sense since the 710 doesn't support LTE).
Has anyone tried any of these or does anyone know of a firmware for the 710 that will automatically pick up MMS settings?
11-29-2012, 04:56 PM #15
- 17 Posts
Tom's steps worked for me as well. Haven't tested MMS but ICS works so far on Bell. Oh, I couldn't find that TELCEL LTE ROM you were talking about but I used the first one you mentioned. I'm getting an H in the top bar instead of 4G now, but I'm not able to access LTE on Bell anyway. I will run speed tests when I go into town to make sure the HSPA+ speeds are still there.
- 01-02-2013, 04:20 PM #18
I have an unlocked at&t Lumia 900 product code 059L6S0, I tried to do this procedure many times with different RM-808 versions like Telcel and others when flashing starts the tool shows the message: Recovery Failes. ERROR: OSBL reported an error! Code: 0x300FF. and the process stop. At the beginning y thougth the problem was the product code but I tried to flash with different at&t versions with different product codes and they works. Do you know any way to solve the problem?
Last edited by fpalomino; 01-02-2013 at 04:34 PM.
- 01-08-2013, 06:51 PM #21
hello I'm trying to do the same, but in my case is a nokia lumia 900 att, its unlocked by imei, I am trying to install telcel firmware, but I have no success,
what I am doing is to download the telcel firmware from navifirm, once downloaded, rename the 3 files containing the product code for the version of my cyan att lumia
1. RM808_059Q7C4_2175.2302.8779.12310_002.dcp with RM808_059M7R4_2175.2302.8779.12310_002.dcp
2. RM808_059Q7C4_2175.2302.8779.12310_002.vpl with
3. RM808_059Q7C4_2175.2302.8779.12310_002_signature.bin with
then I go to the folder
C: \ ProgramData \ Nokia \ Packages \ Products
and created a folder called RM-808
I run the program product support tool for store and connect my att nokia lumia 900 cyan, Connection column select "no connections" then open product and select RM 808
I then recovery programming, update list, and start
and i have the bug the "C: \ ProgramData \ Nokia \ Packages \ Products \ RM-808 \ RM808_059M7R4_2175.2302.8779.12310_002.vpl has invalid signature."
but if not rename the files and leave them as they are 059Q7C4 ...
stop giving the error signature, but I get the following error: Recovery failes. ERROR: Reported OSBL an error! Code: 0x300FF
please anyone has any idea how to flash successfully?
people who have managed to do, could create a more explicit guidance please
thank you very much in advance
- 01-31-2013, 10:37 AM #22
This procedure will not work with nokia lumia 900 from AT&T , had the same error OSBL an error! Code: 0x300FF
i had to buy a Rogers locked phone , unlock it and then flash it with Telcel, work A1 now
Last edited by freddorais; 01-31-2013 at 11:27 AM.
- 01-31-2013, 08:54 PM #23
does anyone know if taking an ATT SIM with an account internet sharing enabled can be stuck in, activate the frickin sharing, then pop your own SIM back in? I'm not even WITH ATT so that stupid pop up message to contact them means nothing to me.